Page 5
Manual 41417-159-2
Chapter 2: Installation
9
0
1
2
3
4
5
6
7
8
10 11
FDM
EMC
1
3
5
Figure 2: EXM Slot Numbering
The EMC-FDM occupies the two open slots on the far right of the chassis.
ID
is a hard-wired ID value. Each EXM type has a unique ID value.
OB1/OB2 are two bytes of option information.
Note that all slots are listed even if the system configuration does not have all the possible
EXM slots. All slots not occupied by an EXM module should show an ID of FF and OB1/OB2
of 00 00 indicating that no EXM is present.
To add or change an EXM configuration, use the cursor keys (arrows) to move between the
fields on the screen. Move the cursor to the appropriate slot entry and type in the correct value.
The ID for the EMC-FDM should be set to 7C.
