General information
PROmesh P9+
– User Manual
7
1.2 Scope of supply
The scope of supply comprises the following individual parts:
PROmesh P9+
7-pin pluggable terminal block, 2.5 mm² (power supply and alarm contact)
User quick start guide (hardcopy)
SD card, for backup and update
Check that the content of your delivery is complete before commissioning. In case of questions, contact our
technical support team immediately before commissioning.
Insert the external memory card into the corresponding slot on the back of the unit before using
the device for the first time (see Figure 1).
1.3 Safety notices
Check that it is in perfect condition externally before commissioning of the device. If any damage
is suspected, return the PROmesh P9+ to your supplier immediately and do not operate the
device. Our technical support team will be happy to answer any questions you may have.
The
PROmesh P9+
was developed for use in PROFINET applications in accordance with
conformance class B. Also note the selection of the data lines used in accordance with the
standard to fully support the PROFINET standards.
Always observe the technical specification of the device to ensure safe and optimum use. The
device is designed for IP30 protected environments. Take appropriate measures in case of
deviating operating environment to ensure proper operation of the device.
Do not open the housing under any circumstances. No parts that require servicing have been
installed. Unauthorised opening of the housing will void any warranty claims.