Web application
PROmesh P9+
– User Manual
26
Figure 13: Alarm trigger
The configured alarm assignments are displayed in lists with consecutive ID.
Alarm triggers with assigned receivers
Alarm receivers with associated triggers
Add and edit alarm triggers
New alarms and messages can be added by clicking on the button with the “+” symbol. If alarms are already
present, the user has the option of editing
or deleting them using a button. In the upper part of the “Alarm
trigger” pop-up, the user can select the different alarms. The associated recipients can be selected in the
lower part of the pop-up and linked to the alarm trigger in this way when the alarms are set up and edited,
provided that the alarm recipients have already been defined.
Adding and editing alarm recipients
New alarm recipients can be added by clicking on the button with the “+” symbol. The relay is already
present as an alarm receiver and cannot be deleted, only linked to alarm triggers. The recipient email,
SNMP, and PROFINET can be selected as well. The associated alarm triggers can be linked to the current
recipient in the lower part of the pop-up.
Error notifications are generated by the device and sent to a management station without being
requested with Simple Network Management Protocol (SNMP). The device cannot determine
whether the manager received the information since the packets are not acknowledged.