Indol 200A++, Operation & Installation Manual, Page: 14 / 32

11
4.Installation
(3) Cooling in the recirculating air mode (see picture below)
The room air is extracted from the storage room or a wine cellar, subsequently cooled and
dehumidified in the heat pump and finally re-introduced into the room. Recreation rooms,
boiler rooms or utility rooms are ideal installation sites. The air ducts leading through warm
sections must be insulated to prevent the formation of condensation.
1. Choose the right path to move the unit;
2. Try to move the unit as original case;
3. If the unit installed in the building of the metal part, it must work for electrical
insulation and comply with the relevant technical standards of electrical equipment.
4.The unit does not include any duct pipe, the customer also can install the duct pipe
during the installation if needed.
(4) variable change over of intake air (see picture below)
A duct system with integrated bypass flaps allows for variable utilization of the heat
contained in the outside air or room air for the production of hot water.
Installation attentions