Indmar 454 Carbureted, Operator'S Manual

Page: 82 / 92

B-2 Indmar Marine Engines
Fluid Capacities 5.7L Carb 5.7L MPI Hammerhead 383 LS1 LQ9/6.0L 8.1L MPI
Crankcase (With Filter) (Note 4) 5.5 Quarts (5.25 L) With Filter 8 Quarts (7.6 L)
Closed Cooling System (Note 5) 12-14 Quarts (11.4-13.3 L)
14-16 Quarts
(13.2-15.1 L)
In-Line 1:1 Transmission (Note 4) 1.7 Quarts (1.6 L) Dexron 3 ATF
4.2 Quarts (4 L)
15W40
In-Line Reduction Gear (Note 4) 2.12 Quarts (2 L) Pennzoil 15W40
4.2 Quarts (4 L)
15W40
ZF Ski-Vee Transmission (Note 4) 2.12 Quarts (2 L) Main Gearbox, 1.0 Quart (1.06 L) V-Drive - Dexron 3
ZF V-Drive Transmission (Note 4) 4.2 Quarts (4 L) Pennzoil 15W40
Walter V-Drive 0.5 Quart (0.5 L) Pennzoil SAE 30 Motor Oil
Notes:
1) Minimum recorded compression in any one cylinder should not be less than 70% of the highest recorded cylinder.
2) Measured using an accurate shop tachometer at normal operating temperature. Idle RPM on EFI models is not
adjustable.
3) Timing must be set using special procedures indicated in the appropriate service manual. Timing cannot be set
using conventional methods. Special tool(s) required.
4) Always use dipstick to determine exact quantity of oil required. Do not fill above “FULL” mark.
5) Do not over fill. Correct level is at the “Full Cold” mark on the coolant recovery bottle when coolant is cold.
OM0502-05 Body.qxd 6/7/05 1:31 AM Page B-2