Pin # 4 = HS CAN HIGH(Orange / Light Green)
Pin # 5 = HS CAN LOW(Orange / Brown)
Pin # 8 = LS CAN LOW(Orange / Brown)
Pin # 18 = LS CAN HIGH(Orange / Blue)
< 2010, 2011 Audi A4 >
11
18
20
1
8
10
< 2012~ Audi Q3 >
Pin # 12 = HS CAN LOW(Orange / Brown)
Pin # 13 = HS CAN HIGH(Orange / Light Green)
Pin # 2 = LS CAN HIGH(Orange / Black)
Pin # 3 = LS CAN LOW(Orange / Brown)
LS CAN H
LS CAN L
AUDI MMI
HS CAN H
HS CAN L
BAT +
GROUND
REVERSE 12V IN
LS CAN H
LS CAN L
AUDI MMI
HS CAN H
HS CAN L
BAT +
GROUND
REVERSE 12V IN
POWER / CAN Cable
POWER / CAN Cable
9 12 13 16
BEM Module(on the left of the glovebox)
– 20-pin Connector
1 4 5 9 19 20
10
18
1 2 3 13
4
CAN wires information(exceptions)
Climate Controller
– 16-pin Connector
Climate Controller
– 20-Pin Connector
• Normally, general models of Audi should be just connected the ‘PAS CAN High, Low wires’ at the climate controller.
• But, some models have different CAN-BUS data. Please refer to above pictures and connect the CAN wires.
LWR Steuergerät Module(on the glovebox)
– 26-Pin Connector
(*In case of
Q3 / ‘6.5-inch’ model, you do not need to connect LS CAN H, L and MMI wires.)
R04-AUDI
Rear-View Camera Interface
