IndigoVision HD Ultra X Bullet, Web Configuration Manual

Page: 8 / 15

Web Configuration Guide - v1 8
2
A
CCESSING THE CAMERA
This section contains instructions on how to access the HD Ultra X Range cameras and log
in to the Web configuration interface.
Requirements
The HD Ultra X Range cameras support web configuration and management using a PC.
Before starting configuration, establish a network connection:
1. Ensure that the HD Ultra X Range cameras are correctly connected to the network.
2. Ensure that the HD Ultra X Range cameras IP address and the PC IP address are in
the same network segment.
3. If there is a router, set the corresponding gateway and subnet mask.
4. Use the command
ping <IP address>
to check the connection.
Logging in
1. In a standard web browser, navigate to the IP address for the camera.
For example, if your device IP is 10.5.1.10, enter
http:// 10.5.1.10
in the
address bar.
The login dialog is displayed.
2. On your first login, you must set the password for the
admin
user.
For more information, see "Set new password" on page 10
3. Enter login and password on the login dialog.
The Live View page is displayed.
4. If the browser supports plugins and VLC is installed, a live Main stream will be
displayed on the web page.
If VLC is not installed, follow the on-screen instructions to install it.
Recent browsers do not support plugins. If you do not install the VLC plugin, web page
streaming is restricted to the HTML5 (MJPEG) codec.