IndigoVision HD Ultra X Bullet, Web Configuration Manual

Page: 10 / 15

Web Configuration Guide - v1 10
3
I
NITIAL CAMERA CONFIGURATION
This section contains information about the HD Ultra X Range cameras settings which must
be configured before first use.
Set new password
When the HD Ultra X Range cameras are accessed for the first time using the Web
configuration pages, the web browser displays a login dialog.
1. Log in with the default username
admin
and password
1234
.
The Password not set dialog is displayed.
2. Click Set Password .
For security reasons, it is important that you set a secure password.
1. Enter a new Admin password in the Password and Retype Password fields shown,
following the displayed password requirements.
You can also use the password strength indicator shown to ensure that you create a
high-strength password.
2. Click Set Password , then OK to complete the configuration.
► For more information, refer to the Control Center Security Hardening Guide
Create new users
For security reasons, you should create additional users with the appropriate level of access
required.
► For more information, please refer to the Control Center Security Hardening Guide
1. On the Setup > System > User Management page, click Add .
2. Enter a username in the ID field and a password for the new user, following the
password requirements.
Use the password strength indicator shown to ensure that you create a high-strength
password.
3. In the User Authority dropdown, select the
Operator
group.
4. Click Apply to complete the creation of the new user.
Modify date and time settings
You can use the Web configuration pages to change the date and time settings on the
camera.
1. To enable Timezone and NTP , configure the following on the Setup > System >
Date&Time Settings page if required:
• Select Timezone and click Apply .