manualshive.com logo in svg

Indian Motorcycle Chief 2010, Manual

Share
Download
Indian Motorcycle Chief 2010 Manual Download Page 60

Indian Motorcycle Company Limited Warranty

60

Transferability

Th

  is warranty extends to the fi rst person who purchases 

this motorcycle for purposes other than resale, and to 
all subsequent buyers during the term of this Noise 
Warranty.

Coverage

IMC warrants that this exhaust system, at the time of 
sale, meets all applicable U.S. Environmental Protection 
Agency regulations (as tested following the 40 CFR 205 
subparts D and E, drive-by test procedure) and Federal 
noise standards.

IMC warrants that this noise control system is free from 
defects in materials and workmanship which could 
cause the motorcycle not to meet U.S. Environmental 
Protection Agency regulations.

 VOID

THE FOLLOWING ITEMS ARE NOT COVERED BY THE 
INDIAN MOTORCYCLE CORPORATION NOISE CONTROL 
SYSTEM WARRANTY:

•  Failures resulting from misuse, alterations or 

accidents.

• Th

  e removal replacement or modifi cation of the 

noise control system (exhaust system and the air 
intake/fi lter assembly) with parts not certifi ed to 

be noise legal for street use.

•  Loss of time, inconvenience, loss of motorcycle 

use or other consequential damages.

We recommend that any noise control system 
maintenance or repair be performed by an authorized 
IMC dealer. Parts other than those recommended by 
IMC should only be used if they are certifi ed to comply 
with U.S. Environmental Protection Agency regulations.

EPA NOISE REGULATIONS

Tampering Warning

TAMPERING WITH THE NOISE CONTROL SYSTEMS IS 
PROHIBITED.

U.S. Federal law prohibits the following acts or the 
causing thereof:

Th

  e removal or rendering inoperative by any person 

other than for purposes of maintenance, repair or 
replacement of any device or element of design 
incorporated into any new vehicle for the purpose of 
noise control prior to its sale or delivery to the ultimate 
purchaser or after its been sold.

Removing, replacing. or modifying any portion of the 
noise control system with parts not certifi ed to be legal 
for street use.

Summary of Contents for Chief 2010



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands