Fault
black camera picture
No reaction to the remote controle
"Write Protect" is displayed when recording
activated
No recording
At the start of the sequence there is no movement
in the video
Unreliable recording using motion detection
Remedy
Check the power supply
Check the connections
Point the IR transmitter at the IR receiver of the recorder when pressing
the buttons
replace the battery
swich off the recorder, remove the SD card and change the position of the
LOCK
Format the SD card before use
Use a new, formatted SD card
The movement will be shown up to 10 seconds into the sequence
increase the sensitivity
change the detection area
increase the light level at the camera image
change the camera channel
Cause
camera has no power
no connection via the A/V cable
No signal received by the recorder
weak battery in remote control
SD card is locked
SD card is not formatted
SD card is faulty
There is an automatic pre-alarm recording of approx
10 seconds before the movement
movement is not detected
wrong camera channel selected
17. Trouble shooting
Indexa GmbH
Paul-Böhringer-Str. 3
74229 Oedheim
Germany
www.indexa.de
2019/03/22
Subject to change
GB - 29
