Index Everest-D, Service Manual

Page: 22 / 51

Version 2.0
Page 22 Index Braille Printer Company
INDEX EVEREST SERVICE MANUAL
2.8.2 Change parameters
Select the option “Change parameters” in the previous menu.
The following menu will now appear:
60 cps
70 cps
80cps
90cps
100cps
2.5mm graphic
2.0mm graphic
Return to main menu
Choose an option according to the installation of your printer, ex. 100cps. from the menu above,
by using the arrow keys + Enter or the key representing the inverse letter on each line.:
A new menu will now appear, as follows:
+5 steps
+4 steps
+3 steps
+2 steps
+1 step
+-0 step
- 1 step
-2 steps
-3 steps
-4 steps
-5 steps
Every step in compensation = 0,15mm
Choose the required adjustment value by using the arrow keys and press the Enter key.
High voltage - use minus values
Low voltage - use plus values
You will then automatically return to the previus menu, where you can choose either to change an
other option or return to main menu.
(We normally recommend to change all the different options/speeds to the same value, but some-
times it can be nessassary with different values for different printing speeds.)
2.8.3 Send file to Everest
Choose “Send file to Everest”. The following menu will appear:
Send file to LPT1
Send file to LPT2
Send file to Com1
Send file to Com2
Exit
Choose the connected port by using the arrow key or the inverse letter in each line.
When the Esc-sequence is transferred to Everest, you will automatically return to the main menu.
The file that you created is will be saved as “Volt.txt” and is built like the following example:
After the start command (ESC+ALT16) there are 7 positions, the first 5 for the different