Index Everest-D, Service Manual, Page: 2 / 51

Version 2.0
Page 2 Index Braille Printer Company
INDEX EVEREST SERVICE MANUAL
1. Mechanics
1.1 Disassembling
This manual contains a flow chart, which describes the easiest way to disassemble and make service on
INDEX Everest-D.
The flow chart is located in chapter 6 in this manual.
The flow chart for disassembling of INDEX EVEREST-D will be used in the following way:
Look for the detail that you want to disassemble in the flow chart, for example anvils.
By following the flow from EVEREST-D to ANVILS. You will see that you have to do the following:
1. Open the front panel cover.
2. Lift out the printing head.
3. Remove the axle.
4. Open the back bar.
5. Lift out the rubber damper.
6. Remove the anvils.
1.1.1 Backplate
Figure 1.1.1 Disassembling of the back plate.
1. Unscrew the three screws from the front side of the sheet feeder.
2. Unscrew the four screws on the back plate.
3. Remove the back plate.
1.1.2 Expose the main board
Figure 1.1.2 Main board.