Operating Instructions – Washer Dryer Indesit WD12X
Control Panel
A. Programme selector knob
Use this knob to select the wash programme.
Turn this knob clockwise only. To select a programme, you should turn the knob so that the symbol/number of the
desired programme is in line with the pointer on the knob.
Now press on/off button H (position I), pilot lamp I will start flashing.
After 5", the setting will be accepted, pilot lamp I will stop flashing (staying lit) and the wash cycle will begin.
Should you wish to interrupt the programme in progress or set a new one, select one of the symbols (Stop/Reset)
and wait 5": when the cancellation has been accepted, pilot lamp I flashes, and you can then turn the appliance off.
After the wash cycle has been set and accepted by the washer-dryer, turning the knob will have no effect (except for
when it is on position Stop/Reset).
B. Temperature control knob
It is used to set the wash temperature. It also allows you to reduce the temperature recommended for the selected
programme, and even to set a cold wash cycle ( ).
C. Drying cycle knob
Use this knob to select the desired drying cycle. Two options are available:
A - Based on time: From 40 minutes to 150.
B - Based on the damp level of the dry clothes:
Iron: slightly damp clothes, easy to iron.
Wardrobe: dry clothes to put away.
