EN
3
. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent film
from the oven and remove any accessories from inside
it.
Heat the oven to 250° C for about one hour.
The oven must be empty during this time.
Follow the instructions for setting the function
correctly.
Notes: it is advisable to air the room after using the appliance
for the first time.
USING THE APPLIANCE FOR THE FIRST TIME
1.
SELECT A FUNCTION
To select a function, turn the
selection knob
to the
symbol for the function you require.
2.
ACTIVATE A FUNCTION
To start the function you have selected, turn the
thermostat knob
to set the temperature you require.
To interrupt the function at any time, switch off the
oven, turn the
selection knob
and the
thermostat knob
to to and .
3.
PREHEATING
Once the function has been activated, the LED
thermostat will switch on signalling that the
preheating process has begun.
At the end of this process, the LED thermostat
switches off indicating that the oven has reached the
set temperature: at this point, place the food inside
and proceed with cooking.
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result.
. SETTING THE TIMER
This option does not interrupt or activate cooking but
allows you to use the display as a timer, both while a
function is active and when the oven is off.
To activate the timer, turn the
timer knob
to the
desired length of time: an acoustic signal will warn
you when the count-down is finished.
DAILY USE
