39 of 39
Indesit
Company
Service Manual UK
English
4.
Connect the machine to the Electrical supply
, the LEDs on the Smart Card Reader will light in
this sequence:
a)
Red
ON: Good Communication between Smart Card Reader and Card.
b)
Red
OFF;
Green
Blinking: Download taking place.
c)
At end,
Green
ON ---> Download OK.
d)
At end, Red ON ---> Download NOT OK.
5.
Programming Complete, disconnect the machine from Electrical supply.
6.
Remove the Smart Card Reader.
NOTES
a
If the
Red
LED is flashing SLOWLY, and a smart card is inserted, check for the following:
•
Blank/erased smart card (previously used),
•
Incorrectly inserted smart card (check orientation of smartcard chip).
b
If the
Red
LED is flashing RAPIDLY, check for the following:
•
Ensure a smart card has been inserted into the smart card reader,
•
Ensure the smart card has been fully inserted?
