Indesit AS60VEX Service Manual Download Page 52

Page: 52 / 78

Language

English

vic

ability

Service Manual

Yate Production Dryers

Edition

2006.09.21

- V. Door catch radius modifi ed to increase strenght of

door catch. Part code C00113820 Door Handle.

- V. Alternative door catch material. Part code C00113820

Door Handle.

S/N is before the 30th of November 2004.

S/N is before the 26th of May 2005.

INTERVENTION TO BE PERFO

RMED

CORRECTIVE ACTIONS

- V. Bitron electromechanical door interlock with built in

relay. This change means that the relay board has been

removed from the console panel. Part code C00141694

Door Lock & PCB, & C00141691 Front Panel

S/N is before the 11th of July 2005.

Door opening / closing

INTERVENTION TO BE PERFO

RMED

CORRECTIVE ACTIONS

- C. Loose (S/N before the 29th of October 2004):

susbtitute with the modifi ed version with the lugs

added to fl oat to ensure secure fi tment (part code

C00113873).

- C. Obstructed by cable tie (S/N before the 6th of De-

cember 2004): Cut off the cable tie tail (the cable tie is

used to hold a group of cable together).

- C. Micro lever sticking (S/N before the 17th of May

2005): add the stop feature to fl oat pin to prevent over

travel (part code C00113884).

- C. Microswitch lever sticking (S/N before the 15th of

August 2005): increase height of pump and fl oat cover

guide legs by 3.5mm (part code C00113893).

- C. S/N before the 15th of August 2005: change the door

microswitch bracket to the modifi ed version with the

improved clip height and the strengthening rib on all

3 impressions. Screw no longer fi tted to front panel

assembly. Part code C00113854.

Check the fl oat switch.

No heat / Water light not switching off

INTERVENTION TO BE PERFO

RMED

CORRECTIVE ACTIONS

Check the contact of microswitch.

- C. Indesit door assembly modified to secure door liner hinge

blocks improved fit of outer door panel: part code C00114678.

S/N is before the 18th of August 2005.

Door fi t

INTERVENTION TO BE PERFO

RMED

CORRECTIVE ACTIONS

Door not closing / Door catch broken

Filter not being cleaned by customer

- C. Use blue condenser fi lter; part code C00113848.

S/N is before the 1st of September 2005.

INTERVENTION TO BE PERFO

RMED

CORRECTIVE ACTIONS

Summary of Contents for AS60VEX















































































Search results

Summary of Contents for AS60VEX

Reviews:

Related manuals for AS60VEX

Brands by name

Popular brands

Indesit AS60VEX, Service Manual

Search results

Summary of Contents for AS60VEX

Reviews:

Related manuals for AS60VEX

Brands by name

Popular brands