iDR-111 / iDR-222 / iDT-HM1 / iDT-BP1: INSTALLATION & OPERATION MANUAL
PAGE 7
iDR-111/iDR-222 CONNECTIONS
1.
Connect the 2 included whip antennas to Antenna A and B ports (7)
.
2.
Connect the AC/DC 12VDC 1.5A power supply to DC in port (12)
.
3. Audio Output Connections:
A)
Connect the BALANCED OUT A/B of each channel
(8) to balanced Microphone or Line input/s with a
quality balanced XLR signal cable. XLR pinout is shown below.
B)
Connect the OUTPUT A/B ports
(9) to unbalanced Line input/s with a 6.35mm TS Phono jack.
C) iDR-222 Dual channel receiver only – OUTPUT MODE:
Output mode switch (10) allows users to mix the outputs of both receiver channels to OUTPUT B
6.35mm TS Phono socket. The balanced XLR microphone outputs will continue to output their discrete
receiver channel.
iDR-222 shown
9
9
12
7
7
10
8
8
Summary of Contents for iDR-111
Page 1: ...iDR 111 iDR 222 SYNC SYNC...
Page 21: ...iDR 111 iDR 222 iDT HM1 iDT BP1 INSTALLATION OPERATION MANUAL PAGE 21 NOTES...
Page 22: ...iDR 111 iDR 222 iDT HM1 iDT BP1 INSTALLATION OPERATION MANUAL PAGE 22 NOTES...
Page 23: ...iDR 111 iDR 222 iDT HM1 iDT BP1 INSTALLATION OPERATION MANUAL PAGE 23 NOTES...
