SAFE 10/30 PLUS
18
SAFE10/30_PLUS_26-05-2017
ENGLISH
MASTER KEY
The Master Keys are the “secondary” keys; they are necessary for Safe opening in case of emergency.
MASTER KEY (RED OR BLUE) ACTIVATION
Place the Owner Key on the receiver, after one beep place it again, after another beep place an IB Key on
the receiver, after one beep the IB Key becomes the Master Key. It is possible to activate up to a maximum
of five Master Keys for each Safe.
To set an IB Key as Master Key, place it on the receiver within 4 seconds after the last typing. The Safe will
emit four beeps to show that the Master Key has been activated.
OPENING THE Safe WITH THE MASTER KEY
Place the Master Key on the receiver, after one beep the Safe opens.
ERASURE OF A MASTER KEY
Place the Owner Key on the receiver, after one beep place it again, after another beep place the Master
Key on the receiver, after 2 beeps the Master Key will be erased.
You can keep erasing the Master Keys within 4 seconds after the last typing.
ERASURE OF ALL THE MASTER KEY
Place the Owner Key on the receiver, after one beep, place it again, after another beep place it again, after
three beeps all the Master Keys will be erased.
WARNING
At this point the Master Key cannot open the Safe anymore; to reactivate it follow again the above-
described procedures.
Place the
Owner Key
1 Beep
Place the
Owner Key
1 Beep
Place the IB Key
1 Beep
Master Key
Place the
Owner Key
1 Beep
Place the
Owner Key
1 Beep
Place the
Master Key
2 Beep
Master Key
Erased
Place the
Owner Key
1 Beep
Place the
Owner Key
1 Beep
Place the
Owner Key
3 Beep
Master Keys
Erased
SAFE 10/30 PLUS
SAFE10/30_PLUS_26-05-2017
19
ENGLISH
TEMPORARY CODE
TEMPORARY CODE SETTING
While the Safe is open, insert a code with 4 to 9 digits, followed by #. After two beeps the Safe closes and
the inserted code will become the Temporary Code. It is possible to set a temporary code for each Safe
until it will be substituted by the new permanent code.
SAFE CLOSURE
Insert the Temporary Code with 4 to 9 digits followed by #, the Safe emits a beep and closes.
SAFE OPENING
Insert the Temporary Code, the Safe opens.
In case you forget the Temporary Code, rest the Owner Key or the Master Key: the Safe opens.
Code + #
2 Beep
Opened
Safe
Temporary code
