HFL-400-P/HFL-550-P User Manual
Page
7
of
15
Copyright 2018 IndeeLift Inc. All Rights Reserved
IL-HFL 400-P/550-P UM
3-21-18
Operation
(continued):
4.
Position the HFL directly behind the fallen patient, with the Mounting Ramp Seat
positioned as close to the fallen patient’s buttocks as possible.
5.
Have the fallen patient scoot themselves backwards into the Mounting Ramp Seat. NOTE: If
the fallen patient has difficulty scooting backwards onto the Mounting Ramp, skip to the
Mount Assist Procedure,
starting on Page 9.
6.
Once the fallen patient is fully seated to the rear of the HFL seat, instruct them to place their
hands on the seat handles and tell them you are about to raise the seat. Once they are ready,
press and hold the up button, as indicated by the arrow on the Wired Remote. The seat will
rise for approximately forty-five seconds and then stop.
Independently scooting onto the HFL
7.
Once the Lift has stopped, the recovered patient can either stand right up, rest and then
stand up at their leisure, or transfer to a wheelchair or other destination for transport.
a)
If returning the fallen patient to a standing position:
•
Instruct the patient return to a standing position by using the Rise-Assist Handles as they
would normally get up from a chair with armrests. NOTE: Be prepared to assist the patient
as they rise from the seated position, if needed.
Standing up from the HFL
•
If necessary, allow the patient to rest before proceeding.
•
Once the fallen patient has been recovered, remember to return the seat to the fully
downward (home) position before returning the HFL to its storage location.
