IndeeLift FTS-600 User Manual
Preliminary FTS-600 UM 1-13-2022
Page
9
of
24
Copyright 2022 IndeeLift Inc. All Rights Reserved
Mounting-Ramp Seat-Tilt
The FTS mounting-ramp seat includes two modes of operation, locked and unlocked. Locked mode
renders the seat rigid and is used when a person is being lifted from the floor, or being transferred to
or from another seated position (i.e., wheelchair, commode, bed, etc.) The unlocked mode is used
when raising a person from a seated position to fully standing. The seat is unlocked in preparation to
raise the user to a standing. Unlocked mode allows the seat to rotate forward as the user is raised and
shifting their weight onto their legs.
Two locking tabs are located at the rear of the seat plate, one on each side of the main vertical column.
The locking tabs are to be used together. Both locking tabs must be slid rearward to release the seat
for rotation. Both locking tabs must be slid forward to lock the seat for transfers or floor lifting.
The Seat Locks MUST be engaged to raise a person from the floor or for
transfers on to or off of the FTS Seat platform!
Preparing the FTS-600 for Use:
Unpacking the FTS-600:
The FTS comes packaged for shipment on a pallet with a strapped cardboard enclosure.
Packed inside the shipping carton will be the FTS, user manual and a box containing the two
batteries, the battery charger and the two safety belts.
•
Cut or remove the bands holding the cardboard enclosure.
•
Lift the cardboard top and remove the two cardboard outer carton components.
•
Remove the box containing the batteries and charger.
•
Remove the screws holding the FTS to the pallet.
•
Remove the wired remote from its protective bag.
•
Remove the plastic wrap holding the Rise-assist handles in place.
Slide the Locking Tab rearward to unlock the seat. Slide the Locking Tab forward to lock the seat.
