Incredible Technologies Golden Tee PGA TOUR Install Manual Download Page 5 | Manualshive

Page: 5 / 29

background image

Golden Tee

®

PGA TOUR

®

Edition

Version 5/22

Page 5

© Copyright Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.

All other marks are the properties of their respective owners. All rights reserved. Commercial. PN 900365060

WARNING

▪

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

▪

The apparatus shall be connected to a mains socket outlet with a protective earthing connection. Substitute
cords may not provide adequate fault protection. Only use the power cord supplied with this product or an
Incredible Technologies, Inc. authorized replacement.

▪

The mains plug or an appliance coupler must remain readily operable.

▪

Use of unauthorized parts or making any unauthorized modifications will void the warranty and may result in
the game operating in an unsafe or incorrect manner.

▪

This Pedestal Cabinet is not suitable for installation in an area where a water jet would be used. The cabinet
must not be cleaned by a water jet.

▪

The Pedestal Cabinet has a handle on the rear that is used ONLY to remove the access door.

▪

DO NOT use this handle to move the cabinet.

«
...
3
4
5
6
7
...
»

Summary of Contents for Golden Tee PGA TOUR






























Reviews:

No comments

Related manuals for Golden Tee PGA TOUR

Brand: Vendors Exchange Pages: 13

Brand: N&W Global Vending Pages: 72

fishbowl frenzy

Brand: Team Play Pages: 99

Diamond Cabinet DZ

Brand: DLV Pages: 53

Brand: Duplo Pages: 98

JURASSIC PARK ARCADE

Brand: I.C.E Pages: 19

ArcadePro Mercury 2097

Brand: Home Leisure Direct Pages: 18

Ninja Assault SD

Brand: NAMCO Pages: 78

Brand: Kamasa-TOOLS Pages: 8

Brand: LAI Games Pages: 21

Tokyo Revengers Tamagotchi

Brand: Bandai Namco Pages: 2

104-20 0310 Series

Brand: Suzohapp Pages: 18

Crazy Drill Master

Brand: Homing Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands