Golden Tee
®
PGA TOUR
®
Edition
Version 5/22
Page 2
© Copyright Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved. Commercial. PN 900365060
PGA TOUR CABINET COMPONENTS
Golden Tee PGA TOUR Edition
– Professional Stand
(1) PGA TOUR Edition Pedestal Cabinet with Wi-Fi
(1) Golden Tee PGA TOUR Edition Professional Stand Kit
(1) 55", 4K, Samsung BE55T-H LED HDTV Monitor with power cable (if ordered
– See note below)
IMPORTANT
Not all orders include a Samsung monitor. If you are providing your own monitor, please be aware that the
“shroud,” aka the back panel with LED lighting that encases the television, was designed to spotlight a 55-
inch TV. It was also crafted with flexibility in mind, meaning any
55-inch, 4K television
should fit into the unit
quite nicely. The dimensions should accommodate all TVs this size.
The Golden Tee PGA TOUR Edition stand and bracket were designed to hold televisions weighing up to 77
pounds. The VESA bracketing is universal and should work with all major television brands.
MAKE SURE YOUR HDTV IS 55
” and 4K.
Shipped inside a plastic parts bag attached to the front of the cabinet:
(1) AC Power Cord for Pedestal Cabinet (10 Feet)
(1) HDMI Cable (15 Feet)
LEG LEVELER ADJUSTMENT
Once your game is in position at the location, it is necessary to adjust the leg levelers. The leg levelers will help
stabilize the game on an uneven floor, and help it from moving or shifting during game play. The game is shipped
with the two front and two rear leg levelers installed. Adjust the levelers as necessary to level and stabilize the
game.
Use one ¾-inch open ended wrench and one 5/8-inch open ended wrench to adjust the leg levelers.
The ¾ inch nut must be cracked and loosened to allow the leveler to move up and down. Use the 5/8-inch wrench
to hold the leveler in place while using the ¾-inch wrench to unlock the locking nut.
After the locking nut is
loosened, adjust the leg leveler to the desired position. Once the levelers are positioned so that the game is
steady, lock the
¾-inch nut
in place on any levelers that where adjusted.
PLEASE DO NOT IGNORE THE ITIP. THESE ARE
IMPORTANT INSTRUCTIONS CALLED OUT WITH THE
IT LOGO TO DRAW YOUR ATTENTION TO THEM.
