13
SCM Control Screen
The SCM Control screen will automatically update containment information. Administrator privileges will be necessary to
access the SCM Control screen. For instructions on FMS programming or on how to obtain an Administrator access level,
please refer to the
T5 FMS Programming Guide
(p/n 000-2142).
Status Indicator Table
Indicator
Description
Alarm
The containment is in an alarm condition.
Enabled
The containment has been enabled by the user or by the application automatically (if the
Auto-Enable on Reset
parameter is turned on in the SCM Setup
)
.
Not Learned
The containment has not been learned.
Solenoid On
Indicates whether the normally closed SCCM solenoid is open or closed.
Vacuum Level
A direct reading from the SCCM Vacuum Sensor.
Control Indicator Table
Indicator
Description
Enable/Disable
Manually enable or disable the containment.
Reset Alarm
Manually reset an alarm on the containment.
Reset Containment
Manually reset the testing cycle of the containment.
Solenoid On/Off
Manually cycle the solenoid on or off.
Learn Indicator Table
Indicator
Description
Learn Message
The status of the learning process.
Learn Mode Active
The containment is being learned.
Learn Mode Error
An error has been detected during the learning process.
Start/Stop
Start or stop the learning procedure.
Summary of Contents for TS-5000
Page 27: ......
Page 28: ... 2013 FFS 000 0528 Rev E ...
