Incite Fire HFC-SBR-23-03, Manual

Page: 8 / 11

TAMPERING DETECTION AND NOTIFICATION
Tampering attempts are detected by a pair of switches (one on the front, the other on the back of the module); once detected, a tampering
event message is broadcasted to the system.
TESTING
1) Activate the fire security system’s alarm condition.
2) Check the HFW - SIM - 01 - AS + HFC - WSR - 03 / HFW - SIM - 01 - AS + HFC - SBR - 23 - 03 output activation.
3) Press the SILENCE SOUNDERS button (or equivalent) on the control panel.
4) Reset the system from the control panel.
All devices must be tested after installation and, successively, on a periodic basis.
BATTERY REPLACEMENT
When the translator module indicates a low battery condition on a child device, batteries must be replaced.
When a low battery condition is indicated, both batteries must be changed altogether.
During this procedure the linking switch must NOT be touched at all !
1) Detach the front operating section from the sounder back box.
2) Extract the HFW - SIM - 01 - AS from the sounder’s back box.
3) Extract the HFW - SIM - 01 - AS ’s battery covers.
4) Extract the batteries.
5) Insert the new batteries into their holders, oriented as per polarity marks.
6) Reinstall the battery covers.
7) Reinstall the HFW - SIM - 01 - AS into the sounder’s back box.
8) Reinstall the front operating section onto the sounder back box.
9) Test the HFW - SIM - 01 - AS + HFC - WSR - 03 / HFW - SIM - 01 - AS + HFC - SBR - 23 - 03 to check if it works properly.