5
Pioneer Modular DDIN radio provision
Note:
For steps 2 and 3, reference the
installation manual provided with the radio
for which hardware to use. The display
screen and radio chassis use two different
types of screws.
1.
Secure the
sub-dash brackets
to the
dash using the factory screws. (Figure A)
2.
Secure the
radio brackets
to the radio
display using (4) screws supplied with
the radio. (Figure B)
3.
Secure the
radio brackets
to the radio
chassis using (4) screws supplied with
the radio. (Figure C)
4.
Snap the
radio housing
into the factory
dash panel. (Figure D)
5.
Snap the factory dash panel back in
place.
6.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
7.
Slide the radio assembly into to the dash
and secure to the
radio housing
using
the (4) included Phillips screws.
(Figure E)
8.
Snap the
radio trim panel
into the
radio housing. (Figure F)
KIT ASSEMBLY
(Figure D)
(Figure B)
(Figure E)
(Figure C)
(Figure F)
(Figure A)
