4
KIT ASSEMBLY
Bottom chassis radio provision
1.
Secure the
sub-dash brackets
to the
dash using the factory screws. (Figure A)
2.
Snap off the front of the
radio brackets
and secure them to the radio using
screws supplied with the radio.
(Figure B, C)
3.
Snap the
radio housing
into the factory
dash panel. (Figure D)
4.
Snap the factory dash panel back
in place.
5.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Test the radio for proper
operation.
6.
Slide the radio assembly into to the dash
and secure to the
radio housing
using
the (4) included Phillips screws.
(Figure E)
7.
Snap the
radio trim panel
into the
radio
housing. (Figure F)
(Figure A)
(Figure D)
(Figure B)
(Figure E)
(Figure C)
(Figure F)
Remove shaded areas