inbody Yscope, User Manual

Page: 8 / 26

6 7
2. Place the charging stand in a flat position.
* Adjust the charging cable to the right length at the bottom of the charging station and place it in the ring.
* When connecting the charging cable, adjust the remaining length by fitting it into the rubber groove located on the bottom of the station.
3. Connect the charging cable to a USB port, as found on an InBody device or computer.
* InBody must be powered on.
InBody
InBody
USB port
Ring
Rubber
groove
InBody
InBody
Caution
• Install the charging station on a flat and vibration-free floor.
• If installed on an uneven floor, there is a risk of the Yscope dropping if the charging station falls or shakes.
• If the charging cable is not inserted into the rubber groove, the cable may be damaged, causing problems with the product, and
the charging station may shake.
• Connect the charging cable to a USB port, as found on an InBody device or computer.
• InBody must be powered on.
• Check the charging status after mounting Yscope on the charging station.
• Battery charge status is displayed on the LED at the top of the unit.