inbody Yscope, User Manual

Page: 10 / 26

8 9
D. Connecting to InBody
*
This product can be measured in conjunction with the InBody, which provides synchronization with the Yscope.
* For information about products that can be synced, please refer to the InBody website.
1. Enter InBody's admin menu to connect.
2. Please search for your device in Setup > Bluetooth.
3. Search the product's serial number to connect to the device. The serial number can be found at the rear of the product.
* If the product cannot be found, refresh to search again.
5. Disconnect the product from the charging station and press the button and the button at the same time for
5 seconds or longer to turn it on.
• Do not operate the product during charging.
• The product button is disabled during charging.
• If you operate the buttons on the Yscope from the charging station, the product may drop and break.
• The battery can be fully discharged if it is kept separate while the power is on.
Caution
Example of low battery notification
No Pacemaker