9
11. The BSM170/170B uses batteries as its power source.
* When the measurement standby time expires, the equipment automatically turns off.
➊
BSM170 standby time: 10 seconds.
➋
BSM170B standby time: 2 minutes if it is not connected to the InBody, 10 seconds if it is connected to the InBody.
1) Open the battery cover located on the right side of the LCD screen.
2) Insert 4 AA batteries.
3) Cover the battery socket with the battery socket lid.
10. Tilt the Stand to a upright position and insert the measuring unit onto the stand as illustrated below.
•
The LCD on the measurement unit and the measurement tape must be visible on the same side.
DANGER
NOTE
CAUTION
참 조
주 의
참 고
주 의
Caution
