D
E
F
G
H
I
Bluetooth re-pairing: Press and hold the button to
interrupt current Bluetooth connection and
re-pair a device
Hands free calling: press to answer a call, press
again to end a call
Bluetooth indicator: blinking blue light ‒
discoverable and ready to pair or reconnect with a
device; solid blue light - connected to a paired
device
Press to play next song, press and hold the button
to continuously increase speaker volume
Press to play previous song, press and hold the
button to continuously to decrease speaker
volume
For charging
To reset the speaker
Press to select the source (smartphone, iPad and
other music player) connected to the AUX input
via 3.5 mm audio cable
Multifunction Button
Next / Volume Up
Previous /
Volume Down
Micro-USB-Anschluss
Reset
AUX
A
B
C
No.
Button Name
Function
Microphone for Bluetooth mode
Press and hold the button for 3 seconds to turn
the speaker on or off; Blinking red light indicates
low battery; Solid red light indicates charging
state
Press to play or pause music
Mic
Power Button /
Battery indicator
Play/Pause Button
Package contents
How to pair a device to the speaker
• 1*MercuryBox speaker
• 1*1.2m/4Ft audio cable
• 1*1.2m/4Ft USB charging cable
• 1*PU protection case
• 1*Hand strap
• 2*Customized cable ties
• 1*Instruction manual
1. Press and hold the power button (Button B) for 3 seconds to turn the
speaker on. (This operation will turn it off when the speaker is on.)
2. The speaker will automatically go into discoverable mode indicated by
Bluetooth paring button (Button D) blinking blue light.
3. From the Bluetooth device list, select the device named “Inateck Mercury-
Box” to connect. The speaker indicates pairing is complete when the
Bluetooth indicator (Button D) changes from blinking blue to solid blue
and the speaker emits a tone.
2