2
2. To power on/power off KB02009
Power on: Press and hold for 3 seconds to turn the keyboard on while the green indicator keeps on for
3 seconds.
Power off: Press and hold for 3 seconds to turn the keyboard off while the green indicator flashes 3
times.
3. To pair KB02009 with a Surface Go
Step 1: Long press for three seconds, the green indicator keeps on for 3 seconds and then goes off
when the keyboard is turned on.
Step 2: Press Fn+ simultaneously, the blue light flashes which means the keyboard is under Bluetooth
pairing mode.
Step 3: On the Surface Go, select All settings – Devices - Add Bluetooth or other device-Bluetooth. The
Surface Go will display “inateck KB02009” as an available device.
Step 4: Select "inateck KB02009" on your Surface Go.
Step 5: The Bluetooth indicator goes off, which means the keyboard has been paired with Surface Go
successfully.
Note
1. After one successful paring, the Bluetooth keyboard and the Surface Go can be automatically paired in
future. However, when interference exists or the Bluetooth signal on Surface Go is unstable, the automatic
paring might fail. In that case, please do as following.
a. Delete all Bluetooth pairing record related to KB02009 on your Surface Go
b. Turn off Bluetooth on your Surface Go
c. Follow
‘To pair KB02009 with a Surface Go’
to connect.
2. The way to restore Bluetooth keyboard to factory modePress
Fn + shift (left) + Backspace simultaneously.
3. To improve the battery life, the keyboard cannot be wakened up by touching the touchpad when it is in
sleep mode. Please wake it up by pressing any button instead.
4.Guide of the keyboard backlight
1. Press + simultaneously to adjust the color of backlight. There are 7 colors available in total.
2. Press + simultaneously to adjust the brightness of the backlight. Three levels for choices.
3. When the battery level is lower than 20%, the backlight turns off automatically.
4. The backlight is not available unless the keyboard is paired with a Surface Go.
5. Uses of Function Keys
1).The way to use F1-F12
Fn Lock disabled (default state) :
Press to dim the brightness of the screen. Press Fn+ simultaneously to use the functionality
owned by F1 key.