USER MANUAL
PAGE 16
REMOVING THE GLASS DOOR PANES
The oven door is made up of 3 panes of glass and has vents at
the top and bottom. When the oven is operating, air is circulated
through the door to keep the outer pane cool. If condensation has
entered in between the glass panes, the door can be dismantled in
order to clean the glass panes.
Remove the door as per above instruction and place it on a
protective surface (e.g. on a table cloth) to prevent it getting
scratched. The door handle should line up with the edge of the
table.
Make sure the glass lies flat to avoid breakage of glass during
cleaning.
1. Undo the 2 screws on upper bracket.
2. Take out upper bracket and first pane of glass.
3. Loosen the 4 clips.
4. Slide out middle pane of glass carefully. Clean the glass panes
and other parts with a damp microfibre cloth or a clean sponge
and a solution of hot water with a little washing-up liquid. Wipe
dry using a soft cloth.
FITTING OVEN SHELVES
1. Ensure shelf orientation is correct (refer picture to the right)
2. Slide into oven at an angle until raised back of shelf is past the
stop on side runners.
3. Lower front of shelf and push in until stop is reached.
4. To remove oven shelves, withdraw to the stop and raise the
front of shelf to clear the stop.
Maintenance & Cleaning Continued
