PAGE 15
This appliance is for household use only, it is not for outdoor use!
IMPORTANT
Unplug your oven before cleaning, or performing maintenance!
To extend the life of your oven, it must be cleaned frequently,
keeping in mind that:
¬ Do not uses steam equipment to clean the appliance.
¬ To protect against the risk of electrical shock, do not immerse
the unit, cord or plug in water or other liquid or sprinkle water
to clean the appliance!
¬ Don’t clean the appliance when it still hot! The inside and
external surface of the oven should preferably be cleaned by
damp cloth when it is cooled down.
¬ Wash all accessories in hot sudsy water or in a dishwasher,
wipe dry with a paper or cloth towel.
¬ If you use your oven for an extended period of time,
condensation may form. Dry it using a soft cloth.
¬ There is a rubber seal surrounding the oven opening which
guarantees its perfect functioning. Check the condition of
this seal on a regular basis. If necessary, clean it and avoid
using abrasive products or objects to do so. Should it become
damaged, please contact your nearest After-sales Service
Centre. We recommend you avoid using the oven until it has
been repaired.
¬ Never line the oven bottom with aluminium foil, as the
consequent accumulation of heat could compromise the
cooking and even damage the enamel.
¬ Clear the glass door using damp cloth and dry it with a soft
cloth.
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the oven door glass since they can scratch the surface, which
may result in shattering of the glass.
REPLACING THE LAMP IN THE OVEN
1. Unplug the appliance or turn off the appliance by isolating
from your power board.
µ This will avoid burns or electrical shock!
2. Unscrew the glass cover attached to the lamp holder.
3. Unscrew the lamp and replace it with another high-
temperature lamp (300 ) with the following characteristics:
— Voltage: AC220V-240V
— Wattage: 15W
— Socket: E 14
4. Remount the glass cover and reconnect the appliance to the
power supply.
WARNING
Ensure that the appliance is unplugged before replacing the lamp
to avoid the possibility of electric shock.
WARNING
Do not operate appliance with damaged cord or plug or after
the apliance malfunctions, or has been damaged in any manner,
return appliance to the nearest Authorized Service Center for
exanmination.
DISASSEMBLING/ASSEMBLING THE OVEN DOOR
To make it easier to clean the inside of your oven, the oven door
can be removed, by proceeding as follows (See illustration below):
¬ Open the door completely and lift the 2 levers “B” (fig.11-1);
¬ Now, shutting the door slightly, you can lift it out by pulling out
the hooks “A” as shown in figure 2.
TO REASSEMBLE THE DOOR:
¬ With the door in a vertical position, insert the two hooks “A”
into the slots;
¬ Ensure that seat “D” is hooked perfectly onto the edge of the
slot (move the oven door backwards and forward slightly);
¬ Keep the oven door open fully, unhook the 2 levers “B”
downwards and then shut the door again.
Maintenance & Cleaning
