Inalto IBM529X, User Manual

Page: 8 / 28

PAGE 8
UNPACKING
Packaging materials:
• This appliance has been packaged to protect
it against transportation damage. Remove all
packaging materials from around and inside
the appliance and keep the original packaging
carton and materials in a safe place. It will help
prevent any damage if the product needs to be
transported in the future, and you can use it
to store the appliance when it is not in use. In
the event the carton is to be disposed of, please
recycle all packaging materials where possible.
• Suffocation: Plastic wrapping can be a
suffocation hazard for babies and young
children, so ensure all packaging materials are
out of their reach and disposed of safely.
• Power cord: Unwind the power cord to its
full length and inspect it for damage. Do not
use the appliance if it or its cord have been
damaged or are not working properly. In case
of damage, contact our after sales support line
for advice on examination, repair or return of
the damaged product.
• Read the manual: Read this manual to
familiarise yourself with the appliance. Pay
particular attention to the safety instructions
on the previous pages.
• Clean: To remove any dust from transit and
storage, wipe the interior and exterior surfaces
of the appliance with lukewarm water and
a soft cloth. Dry thoroughly.
• Do not spray or heavily wash the appliance as it
may affect the electrical insulation properties.
LOCATION
Precautions before installation:
• Before installing or adjusting the accessories
of your unit, ensure that the refrigerator is
disconnected from the power.
• Take precautions to prevent damaging the unit
or causing self harm.
• When selecting a position for your unit you
should make sure the floor is flat and firm, and
the room is well ventilated.
• Avoid locating your unit near a heat source, e.g.
cooker, boiler or radiator.
• Avoid locating your unit in damp or wet
conditions to prevent rust or performance.
• Avoid locating your unit in direct sunlight as it
may increase the electrical consumption.
• When installing the unit, ensure that 10 cm of
free space is left at both sides, 10 cm at the rear
and 30 cm at the top of the unit. This will allow
cold air to circulate around the refrigerator and
improve the efficiency of the cooling process.
Installation Instructions