5
Mounting diagram
Water supply
1. You can connect the water heater directly to the overhead water supply
tank. Do not connect the water heater directly to water lifting pumps.
2. The water should not be too low. The minimum height between the
heater and water supply should be at least 2M.
Water connections
1. Do not connect the cold and hot water pipelines directly to the heater.
Instead connect them using flexible copper pipes. Never use plastic
tubes especially at the outlet, as it cannot withstand heat over extended
usage. In case of direct pipe connections, tightening of couplings using
wrench can damage the heater unit. Always use control / gate valves at
the inlet and outlet. Ensure that the valve at the inlet is always open.
Electrical wiring
Make sure that connections in the plug & socket are secure and proper
earthing is provided to the unit.
A
C
D
B
Wiring diagram
