8
Protection Device
Special instructions concerning protective device
1. When the water in the container/basket is full. The device begin to work. The suction power
will vanish at this moment. The machine will make a noise which indicates the motor is
running at a high speed. Under this circumstance, you should cut off the electricity, clean
out the water. Then equip the machine and turn it on, it will begin to work normally.
2. Only connect to a proper
230V
~, 50Hz socket.
3. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent to
a similarly qualified person in order to avoid a hazard.
4. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction or instruction concerning use of the appliance by
a person responsible for their safety.
5. Children should be supervised to ensure that they do not play with the appliance.
6. The plug must be removed from the socket before cleaning or maintaining the appliance.
Safeguard About the float valve
1. When water is full of the dust container, the float valve starts, at this time, the sucking is
pause, but it will make some unusual sounds, it means the machine is high-speed operate,
when this situation happens, please quickly turn off the power supply, pour out of water, and
then install the machine, turn on the power again , the vacuum cleaner still can operate
normally.
2. When vacuum cleaner is overset, the float valve starts, please quickly turn off the power
supply, set upright the vacuum cleaner , and then turn on the power again.
3. When the float valve starts, using vacuum cleaner could cause the motor's damaging, then
cause the fire. In that case , we should stop using it , and pour out of water , then use it again.
