Inalsa Micro WD10, Instruction Manual And Warranty Card

Page: 10 / 12

Problem Cause Corrective Action
The appliance does not Power cord not firmly Plug in the unit firmly
switch ON plugged into socket.
No power in the main Take it to the authorized service
Supply center.
The appliance has weak Dust bag is full Empty dust bag.
suction power Unit clogged Turn unit off and unplug from
wall socket. Remove dust bag
and check for objects in air duct
and remove.
Dust bag needs cleaning Clean or replace dust bag
The dust escapes from Dust bag is full Empty dust bag
the appliance Dust bag is not installed Review dust bag instruction
correctly.
Puncture/Hole in dust bag Replace dust bag
The hose or brushes do Hose clogged Remove hose and/or brushes
not pick up Remove obstruction from hose.
Dust bag is full Empty and clean dust bag
Heat produced during A small amount of heat is normally produced by the
use vacuum cleaner due to high motor RPM.
9
Trouble Shooting