7
The hose pipe and the Vacuum Cleaner linking up
1.
Insert: Insert the tube connector into the cleaner, and then rotate it clockwise until it locked.
2.
Exsert: Hand the tube connector, rotate it counter-clockwise until exsert the tube.
3.
When using the blowing function, insert the main suction pipe into the blowing port, then
rotate it clockwise until it locked. When exserting it, rotate it counter-clockwise, exsert the
main suction pipe.
Hose Pipe connect with other attachments
1.
Contact joint: insert one end of the tube into the brush, then rotate it clockwise until it's very
tight.
2.
Exsert: Hand both ends of the brush, rotate it counter-clockwise until it's out.
Function Instruction
1.
Power on
•
Insert the plug into the socket.
•.
Turn on the switch.
2.
Air register
•
Adjust the suction-assisted, when the lock catch open, the suction gradually
decreases, when it closed, the suction is gradually increasing.
According to different occasions, you could choose a
suitable accessory.
1.
Small round brush is suit for the floor, carpet and so on.
2.
Small crevice brush is suit for the crevice corner and other places' dusting
and sopping up.
3.
Blowing Port is suit for blowing out the dust in the crevice of the machine.
4.
Floor cum carpet brush cleans your tiles, wooden and granite floors as
well as your carpets, through a single touch switch.
5.
Dry & wet squeezer brush can be used as mops and cleans wet spillage
and even dries your floor.
