20
MANU
AL SELEC
TION
Stopping in the Middle of a Massage
To stop mid-massage, press the
POWER button. The rollers return to their storage positions and stop.
In an emergency
or
if there is some
malfunction
during the operation of the chair, press the
EMERGENCY STOP button. The rollers will stop immediately. After confi rming safety, press the
POWER button. The
rollers return to their storage positions and stop.
Arm Air Massage Intensity Adjustment
The arm air massage intensity can be adjusted.
Each time the air intensity adjustment button is pressed, the intensity changes in the order of Low,
Medium and High.
(The default setting when the program starts is Low.)
Width Adjustment
During a basic operation where width adjustment is possible, the width of the rollers can be
adjusted in 3 steps (narrow, medium and wide).
(The default setting when the program starts is narrow.)
Speed Adjustment
During a basic operation where speed adjustment is possible, the speed of action can be adjusted in
3 steps.
(The default setting when the program starts is the medium level.)
Caution
●
If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If this solution does not
work, stop using and contact your local distributor.
→
May result in injury if you continue use with high stimulation under such circumstances.
●
Do not place your hands or feet into the roller tracks, or the moving parts of the reclining seat back or other areas.
Do not sit wearing hard objects, such as a hair accessory, necklace, watch, bracelet, or ring.
●
If your leg or foot comes out of the leg rest during the massage, do not try to force it back in.
●
Keep massage sessions to no more than 30 minutes in length. Do not exceed 5 minutes for an area-specifi c massage of
any particular part of the body.
Continuous use for extended periods of time can result in over-stimulation, which could cause the opposite of the desired eff ect, or even
injury. Limit the massage time to a total of about 30 minutes in a day.
Changing Programs
Switching from a Manual Selection to a Preset Program
If a preset program button is pressed while a manual selection is in progress, the selection switches to the preset
program. After a total duration of 30 minutes, the program in progress stops even if not completed.
Mechanism Intensity Adjustment
The mechanism intensity can be adjusted in 3 levels.
Each time the button is pressed, the intensity changes in the order of Low, Medium and High.
(The default setting when the program starts is Medium.)
Summary of Contents for HCP-WG1000A
Page 79: ......
