inada HCP-WG1000A, Operating Manual

Page: 12 / 80

13
POSITION ADJUSTMENT
POSITION ADJUSTMENT
How to Sit
Normally, the mechanism is drawn back into the storage position.
For safety, fi rst check the position of the mechanism. If the mechanism is in any position other than the storage
position, turn the main POWER switch ON before sitting down to allow the mechanism to return to its storage position.
When you fi nish checking, sit down slowly in the center of the seat.
Caution
● Do not sit down on the chair while the seat back is reclined.
→ Any sudden impact on the reclining seat back or leg rest could cause damage to the mechanism. Also, an accident or injury may result
if the chair tips over.
● Start off with a lighter massage.
Headrest Adjustment
The headrest is attached to the chair with Velcro on its rear side so that you can adjust the position. Adjust the headrest
to match the position of your head before starting the massage.
Velcro
Headrest
Headrest
(large)
Precautions for Getting On or Off the Chair
When getting on or off the chair, do not support yourself by placing your hands onto the air cushions attached to the
armrests. May result in a mechanical failure. Support yourself when getting on or off the chair by placing your hands on
the end of the armrest anchor.
● Place the headrest in the proper position. If it is not placed properly, the automatic shiatsu point locator may not function properly.
Warning
● Do not subject the armrests to strong impacts from above.
→ Personal injury or damage to the chair may result if the chair tips over.
Adjust the headrest position by changing the position it
is attached to the velcro on the chair.
Proper Position of Headrest
Do not place
at the rear of
your neck.
Place it at the rear
of your head
(occipital).