10
BEFORE USE
●
Do not expose to sudden temperature changes. If the room where the chair is to be used is cold,
turn the heat up slowly. If the chair is moved from a cold place into a heated room, wait one hour
before using the chair.
→
Condensation could occur in the moving parts of the product, which may compromise performance.
Installation
Keep at least 65cm(26 inches) behind the chair when installing, so as
to be able to install the seat back without obstruction.
●
To avoid damaging floor surfaces and to cut down on the noise of the chair, it may be
better to install the chair on a carpeted surface or to lay a piece of carpet under the chair.
●
Install the chair at least 1 m(3 feet) away from TVs, radios, and/or other audio or video
equipment. Interference from these devices can cause problems.
Caution
●
Do not install the chair in an area of high humidity, such as a bathroom
or sauna.
●
Only install on a flat, level surface.
●
Do not use in areas of high debris or dust content. Do not use where
ambient temperature is 104°F or over.
●
Do not install the chair where it can come into contact with direct heat,
such as direct sunlight or a radiator.
●
Keep away from heat sources, open flame, lit cigarettes, and ashtrays.
At least65cm
(26 inches)
BEFORE USE
nspc]j_bw]B]cle//
/.,6,/7/.8.1830?K
Summary of Contents for cube FML-3000D
