800-446-7488
16
www.in-situ.com
7. Close the window.
If you require alarming for the input device, continue with steps 8-12.
8. Click the
Parameters monitoring
tab.
9. Select the input from one of the probe drop down menus.
10. Select the parameter from the parameter drop down menus.
11. Set the Warning and Alarm levels for the parameter, and set the level mode.
12. Click
Write Probe and set-points
.
Disconnect the communication cable and remember to connect the stripped-and-tinned cable of the device
to the Tube before conducting any testing or when deploying the device.
Field Installation
Deploy the Tube
Deploy your In-Situ Instrument as described in the Owner's Manual.
The Tube must be deployed in an area that receives direct sunlight for most of the day. In the northern hemisphere, deploy the
Tube with the solar panel facing south. In the southern hemisphere, deploy the Tube with the solar panel facing north.
Mount the Tube to a wall using the L-bracket and appropriate fasteners (not included), or use the supplied U-bolts to mount the
Tube to a 5.08 cm (2 in.) or smaller diameter pole. When mounting to a pole, In-Situ recommends the pole be secured in cement.
Improving Signal Quality
Cellular signal depends on several factors, including coverage area, antenna type, and objects in the area that may cause
interference.
If your Tube is receiving poor signal or frequently misses transmissions, you can check the following to help determine the cause.
∙ The well casing may prevent the Tube from sending or receiving transmissions. Consider using an external antenna (PN 0062240)
that can be mounted on the top of the well to prevent casing interference.
∙ Check the cellular provider's coverage area map. Your deployment area may be in a non-coverage area.
∙ Check the area surrounding your equipment. Objects like trees, electrical wires, and cement walls can affect cell reception.
Consider moving the Tube to a different area to test reception.
∙ If your system cannot be moved, consider using a different type of antenna that can be mounted away from potential interference.
Troubleshooting
Troubleshooting Common Issues
I Can't Connect
1. Activate the modem and wait 5 seconds. See "Activate the Modem" on page 18.
2. Verify SIM installation. See "SIM Card" on page 18.
3. Verify your SIM has been activated through your service provider.
