Set Top Box USER MANUAL
5
Connecting your Digital Set-Top-Box
Insert your Smartcard
Set Top Box USER MANUAL
6
OPERATION & RECEIVER FUNCTIONS
a
.
First Steps
Refer to the page 5 to connect your Digital Set Top Box to your TV. Follow the steps below when using
your box for the first time.
•
Connect your Digital Set-Top-Box with your TV.
•
Connect your RF wall socket with a RF cable with the CABLE IN socket of your Set Top Box.
•
Switch on your TV.
•
Change the Input in the TV options on your TV to External.
•
Insert your smartcard with chip face down into the smartcard slot.
•
Insert the STBs power cord plug into your room’s power wall socket.
•
Switch on the plug of your power wall socket.
•
After about 5 seconds your box will start with the initial screen.
b. Initial Installation
•
When you switch your box on, it will start the
initial installation with an automatic channel
search. Simply select OK and press
OK
key on your
remote control.
•
After pressing OK the Set-Top-Box will
automatically start to install channels. Do not
press any button during the channel installation.
When the installation is finished you will see the
progress bar completed at 100 per cent. Please
press
OK key
to finish the installation.
•
If your Set-Top-Box fails to find channels, please
check again the cable connection.
