IMT DA435HAR, User Manual, Page: 19 / 34

DA435HAR: 4-9
DRIVELINE MTG OPTION (31701761)
ITEM PART NO. DESCRIPTION QTY
1. POWER TAKE-OFF REF
2. 70058146 END YOKE 1
3. 72060578 SET SCR 3/8-16X3/8 HH 1
4. 70058195 DRIVESHAFT ASM 1
5. 70058094 END YOKE 1
6. 60101988 MOUNTING BRACKET 1
7. 72063005 WASHER 1/2 WRT 4
8. 72060093 CAP SCR 1/2-13X1/2 HHGR5 4
9. 52703382 PUMP MOUNTING BRACKET 1
10. 72063053 WASHER 1/2 LOCK 8
11. 72062004 NUT 1/2-13 HEX 8
12 HYDRAULIC PUMP REF
13. 72060094 CAP SCR 1/2-13X1-3/4 HHGR5 4
31701761.01: 19950918
REPAIR KITS
GASKET KIT - 51393217
7Q072212
O-RING - CYL HEAD 4
76039092 GASKET-REAR BRG HSG .006 2
76039093 GASKET-PUMP COVER 1
76039094 GASKET-REAR BRG HSG .010 2
76039111 GASKET-CYL BLOCK BOTTOM 2
76039112 GASKET-FRT BRG HSG 2
76039119 SEAL 1
76039143 GASKET-REAR BRG HSG .015 2
76039144 GASKET-REAR BRG HSG .020 2
76392119 GASKET-CYL BLOCK 2
76392641 GASKET-REED VALVE/CYL 2
76392642 GASKET-REED VALVE/HEAD 2
WARNING
THE INSTALLER OF THE DRIVELINE MUST INSPECT
THE FINAL POSITION OF THE DRIVELINE TO
DETERMINE WHETHER ITS LOCATION PROVIDES
SUFFICIENT PROTECTION TO AN OPERATOR, OR
OTHER PERSONNEL, FROM HAZARDS ASSOCIATED
WITH A ROTATING DRIVELINE. IF PROTECTION IS
INSUFFICIENT, THE INSTALLATION OF A GUARD IS
REQUIRED. IF YOU ARE UNSURE OF METHODS TO
GUARD A ROTATING DRIVELINE, CALL IOWA MOLD
TOOLING CO., INC. FOR INSTRUCTIONS. FAILURE TO
DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
CLUTCH REPLACEMENT KIT - 51712861
60110273
CLUTCH 1
70732444 CLUTCH HARDWARE 1
77044419 CLUTCH ELECTRICAL FIELD 1
72063050 WASHER 5/16 LOCK 1
PISTON RING SET - 51014947
70014599
COMPRESSION RING 8
70014600 OIL RING 4
CRANKSHAFT KIT - 51705743
51705742
CRANKSHAFT ASM
(INCL: KEY & CRANK)
1
70055010 BEARING-REAR CUP 1
70055011 BEARING-FRT CUP 1
70055012 BEARING-FRT CONE 1
70055009 BEARING-REAR CONE 1
72066307 DRIVE PIN 1
60101269 OIL PUMP COLLAR 1