15
SB-LED | Indoor
WWW.SB-RAILING.COM
4.3 INSTALLING THE
liniLED®
LED STRIP
1
Carefully push the connector into the cavity of the
liniLED® LED strip.
NOTE
The arrow on the connector must point
in the same direction as the arrow on the liniLED® LED strip.
2
Carefully press the liniLED® LED strip into the
aluminum profile.
Start at the point where you placed the connector.
Tip:
Use the SB-LED LED roller.
NOTE
There is a limit to the length of
the liniLED® LED strip that can fitted in one piece.
Deco: 20 meters
Power: 10 meters
Power Short Pitch (PSP): 10 meters
For any of the following situations.
You arrive at a corner
You arrive at a coupling
You arrive at an expansion joint
You reach the end of the handrail
Proceed as follows.
3
Determine where you will cut the liniLED® LED strip.
This should be done as close as possible to the
end of the coupling or the end of the handrail.
Note that the liniLED can
only
be cut at specific designated
places.
NOTE
For more information about liniLED®
Top LED strips, visit www.liniLED.com.
+24V
+24V
+
+
liniLED® Top Deco
liniLED® Top Power
(Power version only available
in white)
liniLED® Top Power
(Only applies to the following
colors: red,
green, blue and amber)
liniLED® Top PSP
