WARNING!
This machine has been designed to reduce at the maximum the risks relative to exposure to electromagnetic
fields. However, residual risks may remain, and therefore it is recommended to respect a minimum safety
distance of 30cm between the inductor and the head or the chest of the operator.
MAINTENANCE
General recommendations
•
It is essential that the maintenance of the machine be carried out by qualified and authorized personnel,
which is aware of the mode of operation thereof.
•
Never perform any cleaning, lubrication or maintenance with the machine running.
•
Before any maintenance work, switch to "0" the main power switch to turn off the power, unplug it from the
network to avoid electrical shock or other hazards resulting from mishandling.
•
Do not wear rings, watches, jewellery, dangling clothing, such as ties, torn garments, scarves, unbuttoned
jackets or zip open that can be caught at work.
•
Instead, you should use suitable clothes for accident prevention, for example: non-slip shoes, anti-noise
headphones, goggles, appropriate gloves, etc. ...
•
Never use gasoline or flammable solvents to clean the machine. Use water and, if needed, commercial non-
toxic solvents.
•
After the interventions, always refit, before restarting the machine, the guards eventually removed.
Preventive Maintenance
Meticulous inspections carried out at regular intervals of time are necessary in order to detect and eliminate
faults quickly, before they can cause damage.
WARNING !
Every time you need to use the IMS POWERDUCTION 50L product, check first the safety devices of
the product, and any anomaly which could lead to bad operation of the product. Check daily for
wear and legibility of the warning signs.
WARNING !
The operational safety of the machine can only be guaranteed if repairs are carried out using only the original
spare parts and if approved maintenance instructions are carried out correctly.
After each use, with the electrical system turned off, the machine should be cleaned promptly, to remove dust
or dirt in general, because they may decrease ventilation and alter the proper functioning of the product and its
durability.
Before each use, check the operation of the control devices, safety devices and the integrity of the electrical
connection cables.
WARNING !
Make periodic visual checks on the inductor to verify that there are no fluid leaks and air inlet port to verify that
they are free.
053410_01 01 2015_V1.1
- 8 -
