Visit www.improvedracing.com for additional support
4
REMOVING THE BUMPER & FACTORY PARTS
1. Follow the instruction manual provided with EFR-100 and remove the
headlights, bumper cover and bumper bar according to the factory service
manual.
INSTALLING THE OIL COOLER ADAPTER
1. Continue following the instructions provided with EFR-100 and install
the adapter onto the engine block.
INSTALLING THE REMOTE OIL FILTER MOUNT
1. Familiarize yourself with ENV-170 by reading over the product manual.
2. Using the preexisting hole in the bumper bar, mock install the mounting
bracket and backing plate for ENV-170 using one M8 screw from the kit,
as shown in Figure 1.
Figure 1 -
Remote Filter Mount Installed on Front Bumper Bar
3. Once the bracket is level, trace the hole or mark the center point.
4. Strike the hole center with a sharp punch.
