STEP 5 (See Diagram 5)
A.) Connect the Upper Sensor Wire (#41) to the Computer Sensor Wire (#44).
B.) Connect the two Pulse Sensor Wires (#42) to the two Computer Pulse Sensor
Wires (#43).
C.) Place the Computer (#33) on the Computer Base (#32). Secure it with two M4 x
½” Philips Screws (#31) and Ø ½” Flat Washers (#40).
D.) Thread the Left Pedal (#30L) counterclockwise into the Left Crank (#29L).
Thread the Right Pedal (#30R) Clockwise into the Right Crank (#29R) on the
other side.
DIAGRAM 5
9