©
IMPEX INC. 12
STEP-6
A.)
Do not tighten Nuts and Bolts and Nuts until instructed to so.
B.) Place the pivot on bottom of right Stride Tube (#21R) to the open bracket on Right Pedal
Support (#9R). Secure the Tube to the right Pedal Support with one M10 x 3
⅛” Hex Bolt
(#20), one Sleeve (#18), one Ø ¾” Washer (#17), and one M10 Aircraft Nut (#16).
C.) Attach the Right Pedal Support rear pivot to the Crank (#24). Secure it with one Right Pedal
Axle Bolt (#10R), one Wrinkled Washer (#11), one Ø 1
⅛” Flat Washer (#12), and one right
Hex Nut (#51R).
D.)
Securely tighten all Nuts and Bolts.
E.) Cover the bottom of right Stride Tube and front Right Pedal Support with two right Pedal
Support Covers (#54R), secure them with two M5 x
⅜” Self Tapping
Screws (#55).
F.) Pace the Right Pedal (#13R) onto the Right Pedal Support, secure with two M8 x 1 ¾” Hex
Bolts (#14) and two Lock Knobs (#15).
