background image

 
 
 

 
 
TABLE OF CONTENTS 

 

BEFORE YOU BEGIN....................................................................................………..  1 
IMPORTANT SAFETY NOTICE.....................................................................………..  2 
HARDWARE PACK…….......…......….............................................................……….. 3 
ASSEMBLY INSTRUCTIONS.........................................................................……….. 4 
EXPLODED DIAGRAM……….........................................................................……….. 9 
PARTS LIST………………………………………………………………………………….. 10 
WARRANTY.................................................................................................…………. 11 
ORDERING PARTS.......................................................................................………… 11

 

 
 

 
 
 
 
 
BEFORE  YOU  BEGIN 

 

Thank you for selecting the MARCY MWB 558 BENCH by IMPEX 
FITNESS PRODUCTS.  For your safety and benefit, read this manual 
carefully before using the machine.   As a manufacturer, we are committed 
to provide you complete customer satisfaction.  If you have any questions, 
or find there are missing or damaged parts, we guarantee you complete 
satisfaction through direct assistance from our factory.  To avoid 
unnecessary delays, 

please call our  TOLL-FREE customer service 

number.  

Our Customer Service Agents will provide immediate assistance 

to you. 

 

 

 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri. 9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

[email protected]

 

Summary of Contents for MARCY MWB -558













Reviews: